How To Install A Vanity Light?

by Lior Alkoby on January 09, 2023

Are you looking to install a new vanity light in your bathroom? If so, you've come to the right place! In this blog post, we'll show you everything you need to know about how to install a vanity light, step by step.

We'll start by going over a few things you'll need to gather before you get started. Then, we'll walk you through the installation process step by step, so you can get your new vanity light up and running in no time.

So, whether you're a first-time installer or a seasoned pro, this blog post will have everything you need to know about how to install a vanity light. Let's get started!

How To Install A Vanity Light?

Determine the vanity light fixture location

The first step is to determine the location of the vanity light fixture. This is typically done by measuring the width of the vanity mirror and finding the center point. Once the center point is found, mark the location with a pencil on the wall.

Turn off the electricity at the breaker

Installing a new vanity light can be a great way to update the look of your bathroom. But before you start, there are a few things you need to do to prepare. First, turn off the electricity at the breaker. This will ensure that you don't accidentally electrocute yourself while working. Next, remove the old light fixture. Carefully disconnect the wires, being sure to note which wire goes where. Once the old light is out, you can start installing the new one.

Remove existing light fixture

Unscrew the mounting hardware and pull the fixture away from the wall. Disconnect the wiring, being careful not to damage the wires. Remove the lightbulb.

Gather and assemble tools and materials

Now that you've chosen the perfect light fixture, it's time to gather the tools and materials you'll need to install it. For most vanity lights, you'll need a screwdriver, drill, wire cutters, and electrical tape. If your light is particularly large or heavy, you may also need a helper to hold it in place while you work.

Once you have everything you need, it's time to get started. Begin by turning off the power to the area where you'll be working. Then, remove the old light fixture, if there is one. Use a screwdriver to loosen the screws that hold it in place, and then carefully pull it down. If there are any wires still attached to the fixture, use wire cutters to snip them off.

Now, it's time to install your new light. First, assemble the fixture according to the instructions that came with it. Once it's put together, hold it up to the spot where you want it to go. Use a drill to make holes for the screws, and then secure the fixture in place. Finally, attach the wires to the electrical box, and turn the power back on.

Install a junction box

If your light fixture doesn't have a junction box, you'll need to install one. A junction box is simply a metal or plastic box that houses the electrical connections for your light.

To install a junction box, start by turning off the power to the circuit that you'll be working on. Then, use a drill to make a hole in the wall where you want the junction box to go. Next, feed the electrical wires through the hole and into the junction box. Finally, secure the junction box to the wall with screws.

Connect and secure wiring

The next step is to connect and secure the wiring. Make sure you have the right type and size of wire for your project. Once you have the wire, you need to strip the insulation off the end. To do this, you can use a wire stripper or a utility knife. Once the insulation is off, twist the bare wires together. You can then use wire nuts to secure the connection. If you need to, you can also use electrical tape to further secure the connection. Finally, tuck the wire into the wall so it is not visible.

Install the vanity light fixture

Installing a vanity light can be a great way to update the look of your bathroom. It can also be a bit of a challenge, depending on the type of light fixture you choose. Here are a few tips to help you install a vanity light in your bathroom:

Choose the right light fixture.

There are a few things to consider when choosing a light fixture for your bathroom. First, think about the style of your bathroom. You want the light fixture to complement the overall look of the room. Second, think about the size of your bathroom. You don’t want a light fixture that is too big or too small for the space. Third, consider the type of light bulbs you want to use. LED bulbs are a good option because they are energy-efficient and long-lasting.

Turn off the power.

Before you start working on the light fixture, make sure to turn off the power to the bathroom. This will help prevent any accidents.

Remove the old light fixture.

If there is an existing light fixture in the spot where you want to install the new one, you will need to remove it. Start by removing the light bulbs and then unscrew

Turn the power back on and test it

Once you have everything hooked up, it is time to turn the power back on. Slowly turn on the breaker or flip the switch back on. You may want to stand back when you do this just in case something is not right. Once the power is on, test the light by turning on the switch next to it. If everything is working right, the light should come on.

In conclusion, installing a vanity light is a relatively simple task that can be completed in a few minutes with the right tools. With a few basic supplies and a little bit of know-how, you can easily update your bathroom with a new vanity light. So, next time you're looking for a quick and easy way to update your bathroom, consider installing a new vanity light.

BACK TO TOP